Purefolio Surface Mould Remover Spray 500ml

General Information Our PUREFOLIO Surface Mould Remover 500ml kills mould on contact and removes unsightly mould, mildew and mould roots from most surfaces including: Plastics – tables and chairs Wood – cupboards, boats and furniture Glass & Mirrors Canvas – Camping Gear, Sports bags and boat covers Fabrics Curtains – Homes and Caravans Tiles – Kitchen and bathrooms Laminates – Benchtops, shops and bathrooms For continuous prevention of mould, following treatment using the Mould Remover Spray, place the Air Purifier Tub near the cleaned area to prevent airborne spores from landing and starting another mould colony. Visible mould ejects mould spores into the air which land and produce more mould. When applied the Surface Mould Remover causes the bacteria to stop multiplying and the mould to dry up, even down to the root system which usually embeds in the surface the mould is using to grow. Spot test on small surface area. Spray onto mould affected area and leave for 10 minutes. Wipe mould off with a clean cloth. When surface is visibly clean, spray again lightly, wipe with clean cloth and allow to dry. Repeat clean after 7 days to ensure all mould roots in surface have been removed. For continuous prevention of mould, following treatment using the Mould Remover Spray, place the Air Purifier Tub near the cleaned area to prevent airborne spores from landing and starting another mould colony. Warnings Keep out of reach of children. Not to be taken. If in contact with eyes, wash with soap and water. Allergy sufferers test before use. Ingredients SAN-AIR proprietary essential oils, purified water, isopropyl alcohol. Directions Spot test on small surface area. Spray onto mould affected area, leave for 10 minutes. Wipe with a clean cloth. Repeat if necessary.